ALL US 01963824448

This crush has been developed for dairy farms with a larger herd and with a set location where
the cow’s hooves are trimmed. This galvanized stationary crush has nearly the same possibilities
as a professional crush at a fraction of the cost. It is also an ideal crush for farms with robotic
milking as other tasks like drying off cows, udder singeing etc, can all be performed in this
crush.

• Self-locking yoke, cow closes the yoke by itself. No need to pull a rope or push a button at the
right moment, with the chance of the animal escaping. Yoke opens outwards. Yoke can be
opened and closed manually from behind the cow.
• 5 x 220 or 110 volt electro motors; both front footrests, the wide bellyband(2x) and the hind leg
hoist all have electro motors. Each motor can be operated where needed.
• Mechanical rear bar that fixes the hind foot securely. The animal can’t kick and it’s safer to use a
grinder and easier to glue a block on. Rear bar fits all cows and is manually ratcheted into
position. Opens automatically.
• Crush also features a rear chain, which means it can also be used for other routine jobs, such as AI
and vet inspections.
• Two double hinged gates on each side of the crush help getting the cows in the crush.

MEASUREMENTS
Length: . . . . . . .190 cm
Width outside: . .135 cm
Width inside: . . . . . 72 cm
Height outside: . . . .225 cm
Height inside: . . . .167 cm
Weight: . . . . . . 580 kgs

FLOOR

The floor is of checker plate to prevent the slipping of the cow as much as possible. At the rear, the box
is widened in order to ensure that the cow will less quickly step besides the crush. This way the cow will
be unable to throw the crush on it’s side. The cow stands on a raised floor so that the trimmer can work
standing upright. To ensure that the crush is always stable one leg is adjustable.

SWING OVER TOOL CARRIER

The latest model is standard equipped with a grinder holder/swing arm that rotates around the crush.
This arm has an attached Led light so one always has good light on the trimming It is also equipped
with 3 electricity sockets (grinder, heater, clippers), a small tool tray and a can holder.