Lumag Auger Set EB520G The Lumag EB520G one man post hole borer auger set comes with 3 augers – 100 mm, 150 mm and 200 mm. This handy tool is not only good for fence posts but also saves hours if you have lots of planting to do. Specifications for Lumag Auger Set EB520G 1 cylinder 2 stroke petrol engine Engine size 52cc Engine power 1.75 kw at 7500 rpm Pull start Electronic ignition Fuel Ratio 25:1 Sound pressure 8.4db (a) Sound Power 113db (a) Max working depth 800 mm Machine weight 20 kg Packaging Dimensions 830 x 570 x 280 mm Warranty & Service All Augers are covered by a 2 year domestic warranty (1 year for commercial). Subject to Lumags warranty terms and conditions. Must be serviced in accordance with operators manual and proof of such. The main service items are daily check the cooling fins etc are free from debris, use correct 2 stroke oil (good quality semi synthetic 2 stroke mix oil and unleaded petrol) mix (25;1) the gearbox fluid which should be changed at 12 months and air filter cleaned every 20 hours or 3 months whichever occurs first and more frequent in extremely dusty conditions. On a service note here is a little bit about fuel. Petrol has a limited shelf life of as little as 30 days so make sure to always use fresh, regular unleaded fuel. You can invest in a fuel stabiliser and add this to your fuel as soon as you purchase it to extend the shelf life up to 12 months. Once it is added to your fuel you can make your two-stroke mix as normal. Keep your invoice for any warranty claims and liaise with Lumag direct or send, drop in too Machine Serve should you have any issues. In all situations please contact Machine Serve first either by email or phone. Operating guidelines in brief There are operating guidelines in the operators manual supplied in the set as well as a mix bottle and small tool kit. You may incur clutch slippage in the first couple of hours usage if at full torque so just go easy. The auger works best with a shaving action with its own weight so don't push with excessive pressure. Too attach augers to powerhead simply align holes and exert bolt and nut with tools supplied. When in use the fuel cap has a verifying screw which should be screwed out when in use anticlockwise and screwed in when transporting to prevent leakage.