Digga Auger Drive PDH7-5 The Digga Auger Drive PDH7-5 is a 75mm square drive unit, this unit has hoses and 1/2" flat face couplers. You will also need to order a bracket and augers. This unit has a flow 70-115 LPM and torque of 6048 Nm at max pressure 240Bar. Max size auger is 900mm. Recomended for around an 8T digger, backhoe or high flow skid steer. HALO plumb guide H standing for Halo. HALO is an alignment system located in the hood ring of the earth drill. It provides the operator with a simultaneous clear line of sight to itself, and the hole being dug. HALO utilises a band of LED lights, which when fully illuminated green, indicate the drive is plumb. If the earth drill moves from its plumb position, a sequence of red and green lights will be lit to effortlessly guide the operator back to plumb. Halo is currently available for Digga PD3-PD7 earth drills. System can be used by cable or battery (see on picture) this is extra. Bracket Brackets available for whatever appliance you need to attach the drive unit to be it a loader bracket, pinned excavator or specialist bracket. Augers There are 3 types of augers available A6 Heavy Conditions MFT- hard ground RC6 Fracturable rock/earth/ clay/ shale DR6 Dedicated rock rotating rock picks Diameter size of augers runs from 150mm upto 1200mm To see how the HALO system works click HERE To see other Digga products click HERE